Якщо ви вперше у нас,
рекомендую подивитись відгуки про наш сервіс.
При покупці двох і більше товарів, буде знижка на самих товарах + набагото дешевша доставка
приймаються всі світові картки через процессинговий центр Приват Банку.
Всі замовлення страхуються на всю суму і Вам немає за що переживати поки Ваш товар їде світом.
TRAFFIC LIGHT CONTROLLER & SEQUENCER 3 LITE SL-3008 120 V., SL-3009 240 V.
Наявність на складі:
Товар не доступний
Постачальник: liberty3guo (всі товари)
Місцезнаходження: Kalamazoo, Michigan
Рейтинг постачальника: 99.8 (95 і більше надійний постачальник)
Час відправки товару після заказу: 1 днi (додається до часу доставки)
Час доставки в Україну: 5-20 днів*
Вартість: 1523 грн.
Ціна: 2012 грн
SEQUENCES AVAILABLE FOR THE THREE CIRCUIT CONTROLLER
Traffic Light Controller
THE IDEAL UNIVERSAL TRAFFIC LIGHT CONTROLLER, PERFECT FOR INCANDESCENT and LED LIGHTS
your none-functioning traffic light back to it's days of glory it had when it
hung over a busy street or on a corner post controlling thousands of cars and
trucks day and night, year after year. Installing our SL-3008 traffic light
controller will restore full sequence operation. Small in size, only 2 ½ x 3 ¼ inches (82.5 x
63.5 mm), and programed with 23 different sequences for you to choose from for
that authentic light pattern. From the
standard US Green, Amber, and Red to random flashing. For the UK and other countries: Green, Amber,
Red, Red plus Amber to Green. Other popular sequences programed in, alternating flashing RR crossing, pedestrian cross walk signals and race staging light tree. Controllers can be ordered for 12 volts ac/dc, 24
volts, 120 volts and 240 volt ac operation. Shipped standard 120 volts to the US and
Canada; 240 volts to the UK, Australia; New Zealand and other countries. All voltages are the same low price. No need to travel to a hardware store for
power cords, wire and mounting hardware. Everything you need to install your
controller is shipped complete in one package; a potential total savings of
$20.00 or more over other controllers. This is the controller of choice in the US and around the world for reliability, versatility, design and service. The use of energy saving voltage reducing transformers for maximum power efficiency, low cost operation and cool operation, no wasted power in heat generated by other voltage reducing methods and helps in the protection against damage from line surges. Relays are used for positive ON-OFF circuit switching. Yes they click, but allow the use of power saving LED lights as low as 4 watts with no glow in the OFF state which can be a problem with solid state switching. All sequences and wiring diagrams are illustrated in very easy to follow
picture style instructions shipped with each unit, including photos of mounting
and wiring. Purchase with confidence
with nearly 13,000 controllers sold worldwide.
The power cord shipped has standard US 120 volt plug. For other voltages and plug style, an adapter
may be needed to match the style socket used in your area. To maximize power savings and lower maintenance the use of LED bulbs is your best choice. Listed is the LED to incandescent equivalence.
4 to 5 W LED = 40 W Incand. 6 to 8 W LED = 60 W Incand. 9 to 13 W LED = 75 W Incand. 25 to 28 W LED = 100 to 150 W Incand. Average life of an incandescent is 1000 to 1200 hours, average life of a LED is 30,000 hours.
1. US standard sequence, Green, Amber, Red and back to Green.
2. UK, Green, Amber, Red to Red plus Amber and back to Green.
3. Early US, Green, Amber, Red, back to Amber to Green.
4. Two light signal, Green to flashing Green to Red and back to Green.
5. Two light traffic light, Green, Green plus Red, Red, back to Green.
6. Green to flashing Red to steady Red and back to Green. This sequence can also
be used, without a traffic light, for “walk, flashing “don’t walk” to steady “don’t walk”
back to “walk” cross walk signal.
7. Single light flashing with choice of adjustable or pre-set flash rate.
8. Two light alternating flash as in a RR crossing signal, adjustable flash rate.
9. Green, Green plus Amber to Red, back to Green.
10. Three light cycle, each light turns ON and stays ON until all ON, then turns OFF and repeats.
11. Three light controller can be used with traffic light and cross walk signal, non-flashing “don’t walk”.
12. Random flash, with adjustable flash rate.
13. Use with three light race staging light tree, available with caution and stop race feature. Connection
for race starting push button, controller cycles once and stops until the next race.
14. Red, Red plus Amber, Green, flashing Green, Amber, back to Red.
15. Green, Amber, Red, all three ON at once, all OFF and back to Green.
To see these sequences in operation, go to "youtube" and search 3 circuit traffic light controller sequences
Let us know if you require a special sequence, we may be able to help you.
This is not a light weight controller, but a commercial grade unit. Voltage spike protected at the line input, step down transformer for better low-voltage control and reliability in the electronic section. Heavy duty relays (10 amp) are used for positive switching control with loads up to 500 watts (4 amps) at 120 volts, more than enough for incandescent, LED, light inductive loads and controlling two traffic lights wired in parallel. For the lowest operating cost, and easiest maintenance, especially for high mounted traffic lights, and maximum controller life, LED lights are by far the best choice, 17,000 hours or more. Suggested lamp wattage in LED would be 6 to 15 watts for indoors, 15 to 20 watts outside. Incandescent, 25 watts inside, 35 to 55 watts outdoors. Incandescent burnouts, and inductive loads can create reverse voltage spikes, which can damage solid-state switches. Also solid state switches can have a problem with LED lights with flickering in the off state. The output section of the microchip in our controller is isolated from any feedback voltage which may be generated, making this controller the perfect choice for your traffic light or railroad grade crossing signal unit. SPECIAL NOTE: the input voltage and the output voltage are always the same, 120 Volts in, 120 Volts out. Each light, Red, Yellow, and Green has its own time setting control. Change the timing on one light, without affecting the other lights. A power outage will not change any of the operations or settings.
All controllers are brand-new, fully tested and USA made in our manufacturing facilities in Kalamazoo, Michigan. We ship worldwide via USPS. Shipping first class package in the United States weighing 13 oz. or less, over 13 oz. shipped priority mail. We do not markup or profit from high shipping charges and no handling charges. International shipments are international first-class packages. Orders received and paid by 4:00 PM Eastern time are shipped same day. Orders received after 4:00 PM Eastern time on Friday are shipped Monday or next working day. Shipping weight per controller is 12 ounces.
Lifetime warranty: If you ever need to return your controller for service, we pay shipping both ways and, no repair charges, EVER, our controllers are that good, and satisfied customers that important. Our upgraded software and lifetime warranty, makes this controller a real bargain. Buy with confidence. Free US shipping.
MADE IN THE USA
ADDITIONAL INFORMATION ABOUT OUR CONTROLLER
After installing, setting up the
sequence, and adjusting the timing pots, it is a good time to try out other
sequences that are programed into your controller. All sequences can be tried, but only the
three relay programs on the three relay controller will show all the
lights. Setting programs for the four
and six relay controller will turn on only lights switched by the first three
relays. Sequences for the four and six
relay controllers will still operate, but only the lights programed for the
first three relays will light providing a time lag while the program completes
the cycle for the higher number relays. Four and six relay controllers are available, send for more information on these.
You can do no harm to the controller by
playing with the sequence settings or entering a switch setting which contains
no program. If an empty switch setting
is set by accident nothing works, not even blinky. Controllers are shipped standard set to
sequence #1. There are copies out there of our controller, but none have our versatility or number of sequence programs with new sequences being added as needed. We also custom design sequences to customer requirements at no charge.
Just because a wire is red, it does not mean it can’t be connected to a yellow or green light. If there is a sequence you would like, but the lights are reversed, change the wiring to suit. All of the colored wire are from the same power line so you may combine colored wires with no harm. Do NOT combine a colored wire with the white wire, this will blow a fuse. Combining colored wire will combine the time setting for each. Combine a green wire with a 20 second time with a yellow wire with a 15 second time will result with a time of 35 seconds total.
New sequences cannot be entered in the field. If you need a sequence that is not in the lineup, let us know, new sequences can only be generated and added here at the factory. In most cases we can generate and enter your program into the lineup at no cost to you.
Voltage questions come up quite often. We manufacture 12 volt AC/DC, 24 volt AC/DC, 120 volt and 240 volt controllers. The voltage at the input will be the voltage at the output. The transformer on the circuit board is for the electronics only and has nothing to do with the output voltage. If your local voltage is 240 volts and your light requires 12 volts, a step-down transformer from 240 volts to 12 volts is needed. Our 12 volt and 24 volt controllers will work with AC or DC. Because of the large selection of outlet plugs around the world, we can’t afford to stock power cords to cover all. For this reason we ship standard 120 volt power cords so you can provide an adapter or cut off the plug and wire on the style for your area.
WHAT BULBS SHOULD I USE?
A number of questions come up about what bulbs to use. Incandescent and LED both work great with this controller, florescent should NOT be used. As to wattage, that depends on where your traffic light is to be used, indoors or out. For outdoors 35 to 55 watt incandescent and 15 to 20 watt LED works well. Indoors 6 to 15 watts LED or 15 to 25 watts incandescent will be quite bright. The use of LED bulbs is by far the best type of bulb to use. Most hardware stores have a wide wattage selection of 120 volt, medium base, screw in bulbs to choose from. The use of LED bulbs with 30,000 hours life or more, will greatly reducing cost and maintenance chores of changing bulbs especially when used outdoors in hard places to get to and extend the life of your controller by several years.